Version:
Handle and blade fully insulated up to 1000 V to DIN EN 60900 / VDE 0682-201.
Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Slim handle with a non-allergenic elastomer coating and a core of particularly tough and impact-resistant polypropylene.
Due to its special surface structure, the grip is non-slip even with oily or wet hands.
Blade of PB Swiss Tools special alloy combines maximum hardness with exceptional toughness.
Reduced blade ⌀ with integral protective insulation for deep-lying screws of spring elements (blade ⌀ = insulation ⌀ near the tip of the blade).
Blades with taper tips, manufactured to the standard dimensions of slots on the screws.
Fully insulated, the breakdown strength of the insulation is many times the minimum test voltage set by VDE.
Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Application:
For use at voltages up to 1000 V.
Optimum working life for electrician’s screwdrivers is assured if screwdrivers always exactly match the standard screw slot size.
(see tables part).
Incorrect screwdriver size selection will cause damage to the screw head.
-----------

Blade width b
3.5 mm

Standard
DIN EN 60900 / VDE 0682-201

Blade designation
2

Tip thickness a
0.6 mm

Blade length
100 mm

overall length
190 mm

Drive profile
Slot-head screwdriver

Type of product
Screwdrivers
Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....