CẦN SIẾT CÓ CHỈNH LỰC GARANT 656050 25 NM

Giới thiệu CẦN SIẾT CÓ CHỈNH LỰC GARANT 656050 25 NM

escription
Version:
Handy and very compact single-arm torque wrench, adjustable by scale and self-triggering.
Extremely high repeat accuracy, since high quality materials are used throughout. Wearing parts,
such as compression springs, are specially pre-treated and sorted. Reversible ratchet for lefthand and right-hand tightening.
Acoustic and perceptible “click effect” ensures particularly easy use and accurate setting of the
desired torque.
With built-in reversible ratchet with ejector − for left-hand and right-hand tightening.
Units of measure: N·m
Function:
The wrench triggers giving a “signal” (clearly audible acoustic tone and noticeable vibration) and
afterwards is immediately ready for use again.
Application:
For medium to larger batch productions.
Standard:
Geprüft nach DIN EN ISO 6789.
Accuracy:
Of the displayed value only for right-hand tightening: ±3 %
Note:
DAkkS calibration option.
The guaranteed measuring accuracy of the torque is achieved only once the torque range has
been calibrated to DIN EN ISO 6789.
Direction of tightening: For right and left-hand tightening
Torque measuring accuracy: ±3 %
Test certificate: Manufacturer’s test certificate
Calibration: O1
Overall length L: 242 mm
Torque range: 2.5 - 25 Nm
Scale graduation, 1 graduation =: 0.25 Nm
Weight: 400 g
Square drive: 1/4 inch
Technical description
Square drive 1/4 inch
Display analogue
Weight 400 g
maximum torque 25 Nm
Torque measuring accuracy ±3 %
Direction of tightening For right and left-hand tightening
Scale graduation, 1 graduation = 0.25 Nm
Torque range 2.5 - 25 Nm
Measurement process Torque
Trigger principle mechanical short-travel release
Standard DIN EN ISO 6789
Lever length including factory calibration reference
dimension [l3]
172 mm
Setting the trigger value with adjustment scale
Feedback triggering
Reversible reading Nm
Connection format Push-through square drive (ratchet)
Adjustable trigger value adjustable
Overall length L 242 mm
Calibration O1
Test certificate Manufacturer’s test certificate
Data can be recorded no
Measurement technology mechanical
Release signalling akustisk
Release signalling haptisk
Type of product Torque Wrench

Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....

Giá DOGA